Syncing 10,000 leads/mo? Get a demo
Webhook - Classic logo
+
Salesmanago logo

How to connect Webhook - Classic with Salesmanago

Connect Webhook - Classic to Salesmanago with LeadsBridge

Webhook - Classic » Salesmanago

In this article, you'll learn how to set up the bridge and connect Webhook - Classic to My CRM Example using LeadsBridge.

How to set up your bridge step-by-step tutorial

Before you start

  1. Head over to the left sidebar and click on the Create new Bridge green button
  2. You'll be taken to the first step of the bridge creation

Step 1: Choose the apps you want to connect

  1. Choose Webhook - Classic as the source for your bridge
  2. Choose Salesmanago as the destination for your bridge
  3. Click on the Continue button
  4. At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)

Step 2: Configure your Webhook - Classic with Salesmanago

Step 2.A: Setup your Webhook - Classic integration

  1. Click on Connect Webhook - Classic
  2. Click on Create new integration to connect your Webhook - Classic (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Webhook - Classic integration
  4. Fill URL, Access Secret field to connect Webhook - Classic with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Webhook - Classic and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Webhook - Classic is connected, you can continue with the set-up of your bridge

Step 2.B: Configuration details for Webhook - Classic

How to get URL, Access Secret

In order to correctly recognize incoming data when the Webhook Integration is used as Source you should do the following:
1. Go into the Source step of your Incoming Webhook Bridge
2. If the Bridge says Waiting for New Lead… means that is on Listening Mode and that any data you submit to the Webhook URL will be read by the LeadsBridge as soon as it arrives into the system

3. You should leave this page open and submit data from the Source in which you have assigned the Webhook URL provided by LeadsBridge. In case you need to close the page and go back later to the Bridge configuration, make sure to set the Bridge on Listening Mode by clicking on the Recognize Other Fields button

4. Once you’re able to submit data from your Source it should get automatically recognized by LeadsBridge

5. In case you forgot to add some data, you should set the Bridge on Listening Mode by clicking on the Recognize Other Fields button and submit new data from your Source

6. In case data is not being correctly recognized you may reach our support with the Missing or wrong fields? Ask for help! button

7. Once all the data you want to map from your Source has been correctly recognized you should continue with your Bridge configuration by clicking on Next

In case you need to map new fields from your Source you should open your Bridge and follow the guidelines from step 5.

Step 2.C: Setup your Salesmanago integration

  1. Click on Connect Salesmanago
  2. Click on Create new integration to connect your Salesmanago (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Salesmanago integration
  4. Fill Client ID, URL, API Secret, Owner Email field to connect Salesmanago with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Salesmanago and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Salesmanago is connected, you can continue with the set-up of your bridge

Step 2.D: Configuration details for Salesmanago

How to get Client ID, URL, API Secret, Owner Email

In order to find the URL (1) Client ID (2) and API Secret (3) you need to follow the steps below:
1. Go to Settings
2. Click on Integration
3. Then, click on API Access
4. Copy and paste those values in your LeadsBridge integration
5. Owner Email is the email address you use for logging into SALESmanago.
Your URL should be one of the following:
- www.salesmanago.pl
- app2.salesmanago.pl
- app3.salesmanago.pl

Step 2.E: Email Receipt (Optional)

You may choose to receive an email receipt for each incoming lead.

  • Type the address(es) where you'd like to receive the receipt
  • You may also modify the Subject line of the email

Step 3: Fields Mapping

Here you'll be able to map your Webhook - Classic information with your Salesmanago fields.

  1. You will have Salesmanago fields on the left. Match the information you wish to pass align from Webhook - Classic
  2. Based on Salesmanago functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
  3. You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
  4. You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped

Step 3.A: Leads Filter (Optional)

If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions

  1. Click on the link Add Filter for Incoming Leads on the top left
  2. A popup wil be opened where you can configure the filter
  3. You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
  4. Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration

Step 3.B Test Connection (Optional)

Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.

Step 4: Save and Publish

  • Click on the Save and publish button

Congratulations! Now your bridge is up and running

Do you need help?

Here some additional resources: