Syncing 10,000 leads/mo? Get a demo
Act-On logo
+
SCI MarketView logo

How to connect Act-On with SCI MarketView

Connect Act-On to SCI MarketView with LeadsBridge

Act-On » SCI MarketView

In this article, you'll learn how to set up the bridge and connect Act-On to My CRM Example using LeadsBridge.

How to set up your bridge step-by-step tutorial

Before you start

  1. Head over to the left sidebar and click on the Create new Bridge green button
  2. You'll be taken to the first step of the bridge creation

Step 1: Choose the apps you want to connect

  1. Choose Act-On as the source for your bridge
  2. Choose SCI MarketView as the destination for your bridge
  3. Click on the Continue button
  4. At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)

Step 2: Configure your Act-On with SCI MarketView

Step 2.A: Setup your Act-On integration

  1. Click on Connect Act-On
  2. Click on Create new integration to connect your Act-On (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Act-On integration
  4. Fill Username, Password field to connect Act-On with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Act-On and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Act-On is connected, you can continue with the set-up of your bridge

Step 2.B: Setup your SCI MarketView integration

  1. Click on Connect SCI MarketView
  2. Click on Create new integration to connect your SCI MarketView (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the SCI MarketView integration
  4. Fill field to connect SCI MarketView with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this SCI MarketView and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your SCI MarketView is connected, you can continue with the set-up of your bridge

Step 2.C: Configuration details for SCI MarketView

How to get Vendor ID, vendor ›› id

To obtain the Vendor ID requested on the integration setup you should ask SCI MarketView support.

Step 2.D: Email Receipt (Optional)

You may choose to receive an email receipt for each incoming lead.

  • Type the address(es) where you'd like to receive the receipt
  • You may also modify the Subject line of the email

Step 3: Fields Mapping

Here you'll be able to map your Act-On information with your SCI MarketView fields.

  1. You will have SCI MarketView fields on the left. Match the information you wish to pass align from Act-On
  2. Based on SCI MarketView functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
  3. You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
  4. You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped

Step 3.A: Leads Filter (Optional)

If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions

  1. Click on the link Add Filter for Incoming Leads on the top left
  2. A popup wil be opened where you can configure the filter
  3. You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
  4. Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration

Step 3.B Test Connection (Optional)

Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.

Step 4: Save and Publish

  • Click on the Save and publish button

Congratulations! Now your bridge is up and running

Do you need help?

Here some additional resources:

RELATED ARTICLES FROM OUR BLOG

5 Instagram tips for car sales that will transform your business!

7 car dealership event ideas you can use all year long

The 5 ultimate car dealership marketing strategies to increase your website’s traffic