Connect Webhook - Classic to Velocify with LeadsBridge
In this article, you'll learn how to set up the bridge and connect Webhook - Classic to My CRM Example using LeadsBridge.
How to set up your bridge step-by-step tutorial
Before you start
- Head over to the left sidebar and click on the Create new Bridge green button
- You'll be taken to the first step of the bridge creation
Step 1: Choose the apps you want to connect
- Choose Webhook - Classic as the source for your bridge
- Choose Velocify as the destination for your bridge
- Click on the Continue button
- At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)
Step 2: Configure your Webhook - Classic with Velocify
Step 2.A: Setup your Webhook - Classic integration
- Click on Connect Webhook - Classic
- Click on Create new integration to connect your Webhook - Classic (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the Webhook - Classic integration
- Fill URL, Access Secret field to connect Webhook - Classic with LeadsBridge
- Click on the Authorize button
- You can choose a name for this Webhook - Classic and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your Webhook - Classic is connected, you can continue with the set-up of your bridge
Step 2.B: Configuration details for Webhook - Classic
How to get URL, Access Secret
In order to correctly recognize incoming data when the Webhook Integration is used as Source you should do the following:
1. Go into the Source step of your Incoming Webhook Bridge
2. If the Bridge says Waiting for New Lead… means that is on Listening Mode and that any data you submit to the Webhook URL will be read by the LeadsBridge as soon as it arrives into the system
![]()
3. You should leave this page open and submit data from the Source in which you have assigned the Webhook URL provided by LeadsBridge. In case you need to close the page and go back later to the Bridge configuration, make sure to set the Bridge on Listening Mode by clicking on the Recognize Other Fields button
![]()
4. Once you’re able to submit data from your Source it should get automatically recognized by LeadsBridge
![]()
5. In case you forgot to add some data, you should set the Bridge on Listening Mode by clicking on the Recognize Other Fields button and submit new data from your Source
![]()
6. In case data is not being correctly recognized you may reach our support with the Missing or wrong fields? Ask for help! button
![]()
7. Once all the data you want to map from your Source has been correctly recognized you should continue with your Bridge configuration by clicking on Next
![]()
In case you need to map new fields from your Source you should open your Bridge and follow the guidelines from step 5.
1. Go into the Source step of your Incoming Webhook Bridge
2. If the Bridge says Waiting for New Lead… means that is on Listening Mode and that any data you submit to the Webhook URL will be read by the LeadsBridge as soon as it arrives into the system
3. You should leave this page open and submit data from the Source in which you have assigned the Webhook URL provided by LeadsBridge. In case you need to close the page and go back later to the Bridge configuration, make sure to set the Bridge on Listening Mode by clicking on the Recognize Other Fields button
4. Once you’re able to submit data from your Source it should get automatically recognized by LeadsBridge
5. In case you forgot to add some data, you should set the Bridge on Listening Mode by clicking on the Recognize Other Fields button and submit new data from your Source
6. In case data is not being correctly recognized you may reach our support with the Missing or wrong fields? Ask for help! button
7. Once all the data you want to map from your Source has been correctly recognized you should continue with your Bridge configuration by clicking on Next
In case you need to map new fields from your Source you should open your Bridge and follow the guidelines from step 5.
Step 2.C: Setup your Velocify integration
- Click on Connect Velocify
- Click on Create new integration to connect your Velocify (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the Velocify integration
- Fill Client ID, Campaign ID field to connect Velocify with LeadsBridge
- Click on the Authorize button
- You can choose a name for this Velocify and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your Velocify is connected, you can continue with the set-up of your bridge
Step 2.D: Configuration details for Velocify
How to get Client ID, Campaign ID
In order to find the Client ID, you need to have a Posting URL. You can find it following these steps:
1. Access the Menu page by clicking on your name in the upper right of the header
2. Under Administration, click on Campaigns
3. Under the main Manage Campaigns page, select the Delivery Instructions/URL link next to the campaign and copy and paste the highlighted area into an e-mail
Into the Posting URL, you'll be able to find the Client ID. In order to get the Client ID, just copy the green-highlighted part of your URL that you can find in the image, into the Integration field.
Please note: requests for a URL can only come from an administrator on the account. If you are a lead provider, please contact the company's administrator.
1. Access the Menu page by clicking on your name in the upper right of the header
2. Under Administration, click on Campaigns
3. Under the main Manage Campaigns page, select the Delivery Instructions/URL link next to the campaign and copy and paste the highlighted area into an e-mail
Into the Posting URL, you'll be able to find the Client ID. In order to get the Client ID, just copy the green-highlighted part of your URL that you can find in the image, into the Integration field.
Please note: requests for a URL can only come from an administrator on the account. If you are a lead provider, please contact the company's administrator.
Campaign ID is a unique identifier associated with each of your campaigns, and they are an easy way for you to reference your campaigns. It's the Campaign ID you would like your leads to import under.
You may find it by accessing the Lead Sources page, under Administration » Lead Sources. IDs are stated at the most left column of the table.
You may find it by accessing the Lead Sources page, under Administration » Lead Sources. IDs are stated at the most left column of the table.
Step 2.E: Email Receipt (Optional)
You may choose to receive an email receipt for each incoming lead.
- Type the address(es) where you'd like to receive the receipt
- You may also modify the Subject line of the email
Step 3: Fields Mapping
Here you'll be able to map your Webhook - Classic information with your Velocify fields.
- You will have Velocify fields on the left. Match the information you wish to pass align from Webhook - Classic
- Based on Velocify functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
- You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
- You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped
Step 3.A: Leads Filter (Optional)
If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions
- Click on the link Add Filter for Incoming Leads on the top left
- A popup wil be opened where you can configure the filter
- You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
- Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration
Step 3.B Test Connection (Optional)
Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.
Step 4: Save and Publish
- Click on the Save and publish button
Congratulations! Now your bridge is up and running
Do you need help?
Here some additional resources:
- Webhook - Classic documentation page and common questions
- Velocify documentation page and common questions
- LeadsBridge KNOWLEDGE BASE
- Contact support from your account clicking on the top right Support button
