Syncing 10,000 leads/mo? Get a demo
Klick-Tipp logo
+
Bmby logo

How to connect Klick-Tipp with Bmby

Connect Klick-Tipp to Bmby with LeadsBridge

Klick-Tipp » Bmby

In this article, you'll learn how to set up the bridge and connect Klick-Tipp to My CRM Example using LeadsBridge.

How to set up your bridge step-by-step tutorial

Before you start

  1. Head over to the left sidebar and click on the Create new Bridge green button
  2. You'll be taken to the first step of the bridge creation

Step 1: Choose the apps you want to connect

  1. Choose Klick-Tipp as the source for your bridge
  2. Choose Bmby as the destination for your bridge
  3. Click on the Continue button
  4. At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)

Step 2: Configure your Klick-Tipp with Bmby

Step 2.A: Setup your Klick-Tipp integration

  1. Click on Connect Klick-Tipp
  2. Click on Create new integration to connect your Klick-Tipp (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Klick-Tipp integration
  4. Fill Username, Password field to connect Klick-Tipp with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Klick-Tipp and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Klick-Tipp is connected, you can continue with the set-up of your bridge

Step 2.B: Configuration details for Klick-Tipp

How to get Username, Password

Enter the Username and Password (your Klick-Tipp credentials)

Step 2.C: Setup your Bmby integration

  1. Click on Connect Bmby
  2. Click on Create new integration to connect your Bmby (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Bmby integration
  4. Fill Password field to connect Bmby with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Bmby and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Bmby is connected, you can continue with the set-up of your bridge

Step 2.D: Configuration details for Bmby

How to get Password

In order to get your Project ID and Password you should follow the steps below:
1. Call bmby and ask them for an integration with https://leadsbridge.com/
2. bmby will provide you the Project ID and Password
3. Finally, type those values into your integration at LeadsBridge

Step 2.E: Email Receipt (Optional)

You may choose to receive an email receipt for each incoming lead.

  • Type the address(es) where you'd like to receive the receipt
  • You may also modify the Subject line of the email

Step 3: Fields Mapping

Here you'll be able to map your Klick-Tipp information with your Bmby fields.

  1. You will have Bmby fields on the left. Match the information you wish to pass align from Klick-Tipp
  2. Based on Bmby functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
  3. You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
  4. You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped

Step 3.A: Leads Filter (Optional)

If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions

  1. Click on the link Add Filter for Incoming Leads on the top left
  2. A popup wil be opened where you can configure the filter
  3. You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
  4. Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration

Step 3.B Test Connection (Optional)

Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.

Step 4: Save and Publish

  • Click on the Save and publish button

Congratulations! Now your bridge is up and running

Do you need help?

Here some additional resources:

RELATED ARTICLES FROM OUR BLOG

20 Quick and Easy facebook post ideas for real estate agents

Clickfunnels for Real Estate: How does it work, examples & integrations

How to use effectively facebook custom audiences for your real estate facebook marketing campaign