Connect NetSuite to Absolute Results with LeadsBridge
![](https://leadsbridge.com/wp-content/themes/leadsbridge/img/integration-logos/logo3101.png)
![](https://leadsbridge.com/wp-content/themes/leadsbridge/img/integration-logos/logo3101.png)
In this article, you'll learn how to set up the bridge and connect NetSuite to My CRM Example using LeadsBridge.
How to set up your bridge step-by-step tutorial
Before you start
- Head over to the left sidebar and click on the Create new Bridge green button
- You'll be taken to the first step of the bridge creation
Step 1: Choose the apps you want to connect
- Choose NetSuite as the source for your bridge
- Choose Absolute Results as the destination for your bridge
- Click on the Continue button
- At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)
Step 2: Configure your NetSuite with Absolute Results
Step 2.A: Setup your NetSuite integration
- Click on Connect NetSuite
- Click on Create new integration to connect your NetSuite (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the NetSuite integration
- Fill URL, Account ID, Consumer key, Consumer secret, Access Token, Access Secret field to connect NetSuite with LeadsBridge
- Click on the Authorize button
- You can choose a name for this NetSuite and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your NetSuite is connected, you can continue with the set-up of your bridge
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/app_config_202.png)
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/app_config_202.png)
Step 2.B: Configuration details for NetSuite
How to get URL, Account ID, Consumer key, Consumer secret, Access Token, Access Secret
To setup the integration correctly, only during the initial configuration you'll have to create an integration inside NetSuite.
In order to get your URL and Account ID you should follow the steps below:
The Account ID value can be found in the example above
After that, in order to get your Consumer Key and Consumer Secret, you should create an Integration inside NetSuite by follow the steps below:
To be able to create an Access Token you should enable your NetSuite account with Token-Based Authentication by following the steps below:
After this you should assign a role to the user’s account you are using inside LeadsBridge by following the steps below:
Now we should create the Token for this user by following the steps below:
In order to get your URL and Account ID you should follow the steps below:
- Log into your NetSuite account as Administrator
- Go to Setup » Company » Company Information
- Your URL should look like one of the following cases:
- https://AccountID.suitetalk.api.netsuite.com
- https://AccountID.app.netsuite.com
- If those URL formats doesn't work, go back to the Company Information page and check the value of CUSTOMER CENTER LOGIN which contains the URL but use only the first part of it: https://XXX.netsuite.com where XXX depends on your account region.
After that, in order to get your Consumer Key and Consumer Secret, you should create an Integration inside NetSuite by follow the steps below:
- Log into your NetSuite account as Administrator
- Go to Setup » Integration » Manage Integrations » New
- Inside the Name field type a descriptive name, for example LeadsBridge Integration
- Keep State as Enabled
- Check the Token-Based Authentication checkbox in the Authentication section
- Then click on Save
- After that, Consumer Key and Consumer Secret will be displayed, copy them.
- Go back into your LeadsBridge Integration and paste your Consumer Key and Consumer Secret in their corresponding fields
To be able to create an Access Token you should enable your NetSuite account with Token-Based Authentication by following the steps below:
- Log into your NetSuite account as Administrator
- Go to Setup » Company » Enable Features
- Click on SuiteCloud sub tab
- Scroll down to Manage Authentication section
- Check the TOKEN-BASED AUTHENTICATION checkbox
- Save your changes
After this you should assign a role to the user’s account you are using inside LeadsBridge by following the steps below:
- Log into your NetSuite account as Administrator
- Go to Setup » Users/Roles » Manage Users
- Under the Name column click on the user’s name you want to give access
- Then click on Edit button under the user’s name
- Go into the Access sub-tab at the bottom
- Then click on the Add dropdown button under Roles, we recommend selecting Full Access or other similar roles
- Click again on Add to assign the role to the user
- After that, click on Save
Now we should create the Token for this user by following the steps below:
- Go to Setup » Users/Roles » Access Tokens » New
- Select an Application Name
- Under User select the user you assigned the Role in the step before
- Inside Role select the one you gave to the user in the step before, for example Full Access
- Under Token Name you can give a descriptive name to the Token you are creating
- Then click on Save button
- Now you should be able to see your Token ID and Token Secret
- Copy your NetSuite Token ID and paste it inside LeadsBridge Access Token field
- Finally, copy your NetSuite Token Secret and paste it inside LeadsBridge Access Secret field
Step 2.C: Setup your Absolute Results integration
- Click on Connect Absolute Results
- Click on Create new integration to connect your Absolute Results (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the Absolute Results integration
- Fill CRM Import Email field to connect Absolute Results with LeadsBridge
- Click on the Authorize button
- You can choose a name for this Absolute Results and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your Absolute Results is connected, you can continue with the set-up of your bridge
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/app_config_519.png)
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/app_config_519.png)
Step 2.D: Configuration details for Absolute Results
Other Info
Required information: The email where you need to send the leads, to obtain it you should ask Absolute Results support.
Step 2.E: Email Receipt (Optional)
You may choose to receive an email receipt for each incoming lead.
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/EmailReceipt.png)
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/EmailReceipt.png)
- Type the address(es) where you'd like to receive the receipt
- You may also modify the Subject line of the email
Step 3: Fields Mapping
Here you'll be able to map your NetSuite information with your Absolute Results fields.
- You will have Absolute Results fields on the left. Match the information you wish to pass align from NetSuite
- Based on Absolute Results functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
- You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
- You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/NBEE_FieldsMapping.png)
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/NBEE_FieldsMapping.png)
Step 3.A: Leads Filter (Optional)
If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions
- Click on the link Add Filter for Incoming Leads on the top left
- A popup wil be opened where you can configure the filter
- You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
- Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/NBEE_Filter.png)
![](https://website-leadsbridge.s3.us-west-2.amazonaws.com/documentation_screenshots/NBEE_Filter.png)
Step 4: Save and Publish
- Click on the Save and publish button
Congratulations! Now your bridge is up and running
Do you need help?
Here some additional resources:
- NetSuite documentation page and common questions
- Absolute Results documentation page and common questions
- LeadsBridge KNOWLEDGE BASE
- Contact support from your account clicking on the top right Support button