Connect Pipedrive to LeadByte with LeadsBridge
In this article, you'll learn how to set up the bridge and connect Pipedrive to My CRM Example using LeadsBridge.
How to set up your bridge step-by-step tutorial
Before you start
- Head over to the left sidebar and click on the Create new Bridge green button
- You'll be taken to the first step of the bridge creation
Step 1: Choose the apps you want to connect
- Choose Pipedrive as the source for your bridge
- Choose LeadByte as the destination for your bridge
- Click on the Continue button
- At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)
Step 2: Configure your Pipedrive with LeadByte
Step 2.A: Setup your Pipedrive integration
- Click on Connect Pipedrive
- Click on Create new integration to connect your Pipedrive (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the Pipedrive integration
- Click on Authorize and you will be prompted to the Pipedrive authorization experience
- Here you will need to provide the info required and grant access to LeadsBridge
- Once done, you will be get back to LeadsBridge application
- You can choose a name for this Pipedrive and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your Pipedrive is connected, you can continue with the set-up of your bridge
Step 2.B: Setup your LeadByte integration
- Click on Connect LeadByte
- Click on Create new integration to connect your LeadByte (or select an existing one from the dropdown if you already connected it)
- A popup wil be opened where you can authorize the LeadByte integration
- Fill Account name, API Key field to connect LeadByte with LeadsBridge
- Click on the Authorize button
- You can choose a name for this LeadByte and LeadsBridge integration (you can also edit it later)
- Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
- Now that your LeadByte is connected, you can continue with the set-up of your bridge
Step 2.C: Configuration details for LeadByte
How to get Account name, API Key
The Account Name is the name of the LeadByte Account used for your User.
You could find it in the login URL
XXXX.leadbyte.co.uk where XXXX is the Account Name
To find the API Key open the REST API section clicking on the menu "Admin --> Tech Hub --> REST API"
You could find it in the login URL
XXXX.leadbyte.co.uk where XXXX is the Account Name
To find the API Key open the REST API section clicking on the menu "Admin --> Tech Hub --> REST API"
Click on the Edit button for the related User.
You could find the API Key under the related label (see GREEN box 1 in the image below).
There are other two important configurations to setup
- API Version to 1.2 (see GREEN box 2 in the image below)
- Set Read permissions for Campaigns and Create permission for Leads (see GREEN box 3 in the image below)
You could find the API Key under the related label (see GREEN box 1 in the image below).
There are other two important configurations to setup
- API Version to 1.2 (see GREEN box 2 in the image below)
- Set Read permissions for Campaigns and Create permission for Leads (see GREEN box 3 in the image below)
Other Info
Another important configuration is the Daily API rate limits.
If you set a specific daily limit, once the limit is reached, LeadsBridge will not be able to sync Leads until the limit is reset on the day after.
If you don't need a daily limit, leave the values to 0.
If you set a specific daily limit, once the limit is reached, LeadsBridge will not be able to sync Leads until the limit is reset on the day after.
If you don't need a daily limit, leave the values to 0.
Step 2.D: Email Receipt (Optional)
You may choose to receive an email receipt for each incoming lead.
- Type the address(es) where you'd like to receive the receipt
- You may also modify the Subject line of the email
Step 3: Fields Mapping
Here you'll be able to map your Pipedrive information with your LeadByte fields.
- You will have LeadByte fields on the left. Match the information you wish to pass align from Pipedrive
- Based on LeadByte functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
- You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
- You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped
Step 3.A: Leads Filter (Optional)
If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions
- Click on the link Add Filter for Incoming Leads on the top left
- A popup wil be opened where you can configure the filter
- You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
- Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration
Step 3.B Test Connection (Optional)
Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.
Step 4: Save and Publish
- Click on the Save and publish button
Congratulations! Now your bridge is up and running
Do you need help?
Here some additional resources:
- Pipedrive documentation page and common questions
- LeadByte documentation page and common questions
- LeadsBridge KNOWLEDGE BASE
- Contact support from your account clicking on the top right Support button
