Syncing 10,000 leads/mo? Get a demo
Landingi logo
+
Vonage logo

How to connect Landingi with Vonage

Connect Landingi to Vonage with LeadsBridge

Landingi » Vonage

In this article, you'll learn how to set up the bridge and connect Landingi to My CRM Example using LeadsBridge.

How to set up your bridge step-by-step tutorial

Before you start

  1. Head over to the left sidebar and click on the Create new Bridge green button
  2. You'll be taken to the first step of the bridge creation

Step 1: Choose the apps you want to connect

  1. Choose Landingi as the source for your bridge
  2. Choose Vonage as the destination for your bridge
  3. Click on the Continue button
  4. At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)

Step 2: Configure your Landingi with Vonage

Step 2.A: Setup your Landingi integration

  1. Click on Connect Landingi
  2. Click on Create new integration to connect your Landingi (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Landingi integration
  4. Fill URL, Access Secret field to connect Landingi with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Landingi and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Landingi is connected, you can continue with the set-up of your bridge

Step 2.B: Configuration details for Landingi

How to get URL, Access Secret

Landingi gives the possibility to send lead’s information to a Webhook URL, this is set up in the form settings. Create the bridge and select Landingi as Source. In the source step, you’ll see a URL address, set that endpoint as the data receiver inside your Landingi form settings.
Set the Webhook with lead information in a form by following the steps below:
1. Log in to your account in the Landingi platform. Then go to editing the selected landing page.
2. In the editor, go to form settings. On the left, enter the Integrations and choose integration with Webhook.
3. In the Request URL field, paste the URL provided by LeadsBrdige during the Bridge creation.
4. In the Request method field, select POST.
5. Map the Landingi form fields with the fields that you would like to receive in LeadsBridge.
6. In the Request Headers fields, set the request headers that will be sent each time the form is sent. Remember that each heading consists of two parts: key and value, e.g. API_KEY: 1234-abcd-5678, where the first field concerns key and the second - value.
7. In the Request parameters fields you can set additional parameters that will be sent together with the form. Similarly to headers, it consists of two parts: key and value, which should be completed. For example, if we have a form with an email field and we set one parameter source:landingi, then each time someone sends this form, the query will send data to the API: email: marta@test.com (or what the user enters in the form) and source: Landingi. The request parameters perform almost the same function as the hidden fields in the form, but their advantage is that they are invisible from the page code.
For further information see: https://landingi.com/help/webhook-integration/

Step 2.C: Setup your Vonage integration

  1. Click on Connect Vonage
  2. Click on Create new integration to connect your Vonage (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Vonage integration
  4. Fill API Key, API Secret, Send SMS from field to connect Vonage with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Vonage and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Vonage is connected, you can continue with the set-up of your bridge

Step 2.D: Configuration details for Vonage

How to get API Key, API Secret, Send SMS from

Your API key can be found and updated under the "API settings" section on the Settings page in the Dashboard. ( Learn more)
Your API secret can be found and updated under the "API settings" section on the Settings page in the Dashboard. ( Learn more)

Other Info

Put the name that you want to be shown as Sender in the SMS that will be sent.

Step 2.E: Email Receipt (Optional)

You may choose to receive an email receipt for each incoming lead.

  • Type the address(es) where you'd like to receive the receipt
  • You may also modify the Subject line of the email

Step 3: Fields Mapping

Here you'll be able to map your Landingi information with your Vonage fields.

  1. You will have Vonage fields on the left. Match the information you wish to pass align from Landingi
  2. Based on Vonage functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
  3. You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
  4. You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped

Step 3.A: Leads Filter (Optional)

If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions

  1. Click on the link Add Filter for Incoming Leads on the top left
  2. A popup wil be opened where you can configure the filter
  3. You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
  4. Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration

Step 3.B Test Connection (Optional)

Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.

Step 4: Save and Publish

  • Click on the Save and publish button

Congratulations! Now your bridge is up and running

Do you need help?

Here some additional resources:

RELATED ARTICLES FROM OUR BLOG

The best Facebook Lead Ads integrations for your marketing campaigns

How to create Instagram Stories Leads Ads (with useful example)

Google Lead Form Ads: The Complete, Always-Updated Guide to Google Lead Generation