Syncing 10,000 leads/mo? Get a demo
Leadpages logo
+
Easy Webinar logo

How to connect Leadpages with Easy Webinar

Connect Leadpages to Easy Webinar with LeadsBridge

Leadpages » Easy Webinar

In this article, you'll learn how to set up the bridge and connect Leadpages to My CRM Example using LeadsBridge.

How to set up your bridge step-by-step tutorial

Before you start

  1. Head over to the left sidebar and click on the Create new Bridge green button
  2. You'll be taken to the first step of the bridge creation

Step 1: Choose the apps you want to connect

  1. Choose Leadpages as the source for your bridge
  2. Choose Easy Webinar as the destination for your bridge
  3. Click on the Continue button
  4. At this point you can choose a name for your bridge (this will only be visible inside LeadsBridge and you can also edit it later)

Step 2: Configure your Leadpages with Easy Webinar

Step 2.A: Setup your Leadpages integration

  1. Click on Connect Leadpages
  2. Click on Create new integration to connect your Leadpages (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Leadpages integration
  4. Fill field to connect Leadpages with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Leadpages and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Leadpages is connected, you can continue with the set-up of your bridge

Step 2.B: Configuration details for Leadpages

Other Info

- Head over to Leadpages "Account Settings > Lead Notifications" section
- Add a new “Lead Notifications” email address
- Insert the unique email provided by LeadsBridge under “Add another email” type box
- Once this is done, LeadPages will send a confirmation email
- Go back to LeadsBridge and click on “Click Here To Open Link” so you may confirm the email.
This is a very important step!
- Go to your integrations page inside LeadPages and check the email status, it should say Confirmed
- Inside LeadPages, head over to the form you’d like to use as a source
- Go to Edit Your Form and add the integration to the form
- Select the unique email from LeadsBridge
- Now head back to LeadsBridge and click on “Recognize Other Fields” button
- Once it says “Waiting for a New Lead” you may go to where your form is
- View your form as a Lead, this means clicking on the “View” eye inside LeadPages or going to the page where it’s Published
- Fill in information for a test lead and submit it
- Go back to LeadsBridge and you’ll see the fields show up on the source step
- You may now continue with the Destination set up and Fields Matching

Step 2.C: Setup your Easy Webinar integration

  1. Click on Connect Easy Webinar
  2. Click on Create new integration to connect your Easy Webinar (or select an existing one from the dropdown if you already connected it)
  3. A popup wil be opened where you can authorize the Easy Webinar integration
  4. Fill HTML form code field to connect Easy Webinar with LeadsBridge
  5. Click on the Authorize button
  6. You can choose a name for this Easy Webinar and LeadsBridge integration (you can also edit it later)
  7. Once done, click on Continue button and you will get back to the bridge experience where you could choose additional integration settings
  8. Now that your Easy Webinar is connected, you can continue with the set-up of your bridge

Step 2.D: Configuration details for Easy Webinar

How to get HTML form code

If your CRM has the feature called Web-To-Form or HTML form, to embed HTML code inside a web page, you only need to copy and paste the HTML code into LeadsBridge as a new custom HTML form integration.

An HTML form code is something that typically starts with <form> and ends with </form>. Pay attention that the attribute “action” should be specified inside the tag form.

Learn more about HTML forms here: ( Learn more)

Other Info

If you don't have the form code but you have an opt-in form online, you may copy its code by following these steps:

  1. Open your opt-in form page

  2. Hover the form

  3. Right-click to open the contextual menu

  4. Click on "Inspect" the open the dev tool

  5. Position at the form action line

  6. Right-click and "Edit as HTML"

  7. Copy the form code

"Encoding", "Timeout", "Success Patterns" and "Failure Patterns" can be left with their default values, you don't need to set them in most cases. If you'd like to know more, please read the common questions below.

Step 2.E: Email Receipt (Optional)

You may choose to receive an email receipt for each incoming lead.

  • Type the address(es) where you'd like to receive the receipt
  • You may also modify the Subject line of the email

Step 3: Fields Mapping

Here you'll be able to map your Leadpages information with your Easy Webinar fields.

  1. You will have Easy Webinar fields on the left. Match the information you wish to pass align from Leadpages
  2. Based on Easy Webinar functionality, some fields might be required; if this is the case, you can identify those fields with a * (star), so be sure to map all them
  3. You can also use the functions to customize information like reformatting dates and times or modifying text, phone numbers and so on.
  4. You may leave blank the box of a field's information you don't want to send through. Clicking on the Show unmapped fields button you will have visibility on all the available fields still not mapped

Step 3.A: Leads Filter (Optional)

If you'd like you could add a filter for incoming leads. This filter will sync only leads that meet the configured conditions

  1. Click on the link Add Filter for Incoming Leads on the top left
  2. A popup wil be opened where you can configure the filter
  3. You can define a series of condition to filter the leads. The lead will be synced only when all the conditions will be met
  4. Once finished, click the Save Changes button to switch back to the Fields Mapping to continue with the bridge configuration

Step 3.B Test Connection (Optional)

Once you’ve mapped all the fields that you need, if available, you can run a test of your connection by clicking on the Test Connection button.

Step 4: Save and Publish

  • Click on the Save and publish button

Congratulations! Now your bridge is up and running

Do you need help?

Here some additional resources:

RELATED ARTICLES FROM OUR BLOG

The best Facebook Lead Ads integrations for your marketing campaigns

How to create Instagram Stories Leads Ads (with useful example)

Google Lead Form Ads: The Complete, Always-Updated Guide to Google Lead Generation